LG WD-1045FH Front Load Washer "order hall sensors" Questions

...no resistance reading then the winding is burned. Replace the rotor winding. Rotor windings can be ordered from here: ...

...circuited). ?_ Repair/replace the damaged WIRE HARNESS ? The Hall Sensor is out of order/defective. ?_ Replace the Motor ? The controller(Main) is out of order/defective. ?_ Replace the PWB

...hall sensor shorted/destroyed from sudslock bE: Ball sensor loose connection/out of order EE: eeprom out test mode only PF: power failure momentary interruption of shocktricity LG washer notes: ...

...hall sensor is out of order/defective. Replace the STATOR ASSEMBLY If this does not help take of your statot and see if the hall sensor can be clicked off. On the hall sensor is always noted the pat ...

...the stator, unplug the two wire plugs, and, now, out of machine, unclip the hall sensor and replace. Reinstall opposite way. Here is the stator to order. Here is the sensor to order. Keep me

...hall sensor shorted/destroyed from sudslock bE: Ball sensor loose connection/out of order EE: eeprom out test mode only PF: power failure momentary interuption of shocktricity FYI: Nearly all brands ...

...order What is your question? Well the question at the top says "Ball Sensor" which is the "bE" error, and some of these answers are talking about the "Hall Sensor" my machine has both, and this is ...

order Hall Effect Sensor. Other causes includes defective Main Board and broken wiring harness. To check the Hall Effect Sensor: Unplug the machine. Remove the top plate assembly by unscrewing the two

...out and he checked motor - said it was generating power and stated must be motor control board. i ordered new motor control board - part number 6871er1003c (to replace original 6871ec1087c - lg ...

hall sensor is out of order/defective.  The hall sensor seems to be part of the motor. The 'LE' error message indicates the control board has detected that the motor is either not turning, or has