Question about LG WM Washing Machines
...replace the broken door handle. This seems like a relatively easy task. Any help with this would be appreciated, I suspect it might require removing the i nner part of the door to get to the handle ...
...handle and push the hook towards the right side of the machine.Once open, you can check the release mechanism in the actual door. Ours is broken, so need to sort out how to repair/replace it
...door. Once the drum is empty, unscrew the handle completely to remove filter housing an clean out thoroughly. replace and tighten up. Turn on power and reset all programmes. this should work, total ...
...handle to secure presure) the water pours out from behind the door. There is a lot of give or play in the door even after it is closed, I did notice that you have to lift up a little on the door to ...
...door. Drain the water from the filter housing by pulling the tube out of the clip and unplugging, allow it to run into a bucket while the machine is in spin only mode. This mode is acheived when the ...
replace the pump filter. Now wash your clothes like you normally would. I do this at the beginning of the first load for the day. I don't do it before each load. The clothes will smell clean. And yes,
...replace the gasket in the door. After I told the first person I spoke with that I would not pay for a repair, that I wanted the machine out of my house, they switched me over to the Whirlpool Safety ...
...replace our original washer with a new one but it smells just as bad. There has to be an issue with how the water is drained from the washer between cycles and when finished. You would think that LG ...
...replace the door switch assembly. Hope that helps.......... Enter model number at search tab- Select Door & Handle components at "PartType" http://www.repairclinic.com/SmartSearch/smartsearch.aspx it ...
321 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
245 Questions
234 Questions
195 Questions
