Question about LG WM Washing Machines
reset and checked for power but the Washer and Dryer would not show signs of life. I was thinking that there is an internal fuse that can be changed inside the appliance but can't find it. Please help
...power outage has occurred. Reset circuit breaker or replace fuse. Do not increase fuse capacity. If problem is a circuit overload, have it corrected by a qualified electrician. 3)Water supply tap is ...
...machine from the back (and vacuuming underneath--yuck!), I left the washer unplugged for about 30 min. From reading other forums and such, I realized that unplugging for a little while is often the ...
...machine, it works until the lights flash again. I tried unplugging and re-plugging or turn it off, but nothing I tried so far can reset it. A technician checked it and said the control board needs to ...
Question about Washing Machines
Reset the Machine: Turn off the washing machine and unplug it from the power source. Wait for a few minutes (around 5-10 minutes). Plug the machine back in and turn it on. Check Door Lock: Ensure that
Question about Whirlpool Washing Machines
...washer dryer computer. https://www.youtube.com/watch?v=IJFAibrHDyY some ways to reset your machine link https://homeguides.sfgate.com/reset-buttons-washing-machines-104441.html hope this may ...
Question about Washing Machines
...reset on a front load washer after a power outage? it was running prior to the outage and the door is locked. I have tried unplugging it for a while and holding the start pause button but htis does ...
...washing machine. We had a power outage and when the power came back on the machine won't quit running. The door is locked and I can't get machine to stop or open. Is there a way to reset it. Unplug ...
Question about Amana Washing Machines
...reset an Amana washer after power outage? Only works in spin cycle. washer was not in use at the time of the outage. Washer will only work in spin cycle. When it comes to electronic utilities you can ...
Question about Electrolux Washing Machines
...power outage. start/pause button now flashes and won't start any cycle. Try to turn circuit breaker off, or unplug unit, for about 5-6 minutes. This is a hard reset and should reset the ...
2,568 questions posted
Usually answered in minutes!
401 Questions
243 Questions
245 Questions
234 Questions
195 Questions