...mounting the plastic piece onto the rotor so it appears that the designers anticipated selling replacement for the plastic piece alone. So far this evening, I've only been able to find complete ...
Washer will not spin. stutters and then no movement Problem began with stripped rotor center -replaced rotor replaced Hall sensor Replaced stator (2nd hall sensor included then no power whatsoever - ...
...replace it with a new one and reverse the proceedure. Be careful when putting it back, the stator has 3 plastic pins for alignment, and when putting the rotor back on watch your fingers as it pulls ...
Question about LG WM Washing Machines
...it for damage. Its possible for the rotor to scrape at the mounting points of the RPS and damage it. If the stator shows wear from contact with the rotor, replace it along with the RPS.Good
...replace the center of the rotor, but that part is not available. Also, one would think if the center hub had larger or wider teeth this wouldn't happen. The stress on the teeth of the center hub ...
...REPLACE this bolt that supposedly holds so much together... I still don't feel confident about that. I have an LG WM0642-HW washer that was making a grinding noise too. Called LG and the authorized ...
Question about LG WM Washing Machines
...now has stopped spinning Remove back cover and check for a loose nut that holds the rotor. you may have to replace the rotor( is the cover that holds the magnets). Not the stator (which is the
replace the hall effect sensor on the LG2277HW? Where is it located? It is mounted under the rotor. Their is a nut you remove and then the rotor comes off and exposes the stator and hall effect sensor
...rotor, replace rotor and you're done. IF SPLINE IS NOT STRIPPED ....... Oh s***! The drive shaft has broken loose from the three arms which attach it to the drum. (the part is called the "spider") To ...
Question about LG WM Washing Machines
...an overload situation, if you have changed the Hall sensor and rotor, the only other problem is the stator overheating which will bring on the LE display. Check the stator assembly, replace is
2,568 questions posted
Usually answered in minutes!
401 Questions
243 Questions
245 Questions
234 Questions
195 Questions