black bundle of wires snapped into the sides of the detergent tray. Take this bundle out of the clips so it hangs loose. Remove the two screws from the front of the detergent tray. These are on either
black hose right in the middle - when I squeezed mine a little, I could see where the water was dripping out from the bottom. There are three clamps - two that can be squeezed with pliers and removed,
Question about LG WM Washing Machines
...black plastic material and can easily cross thread, so be careful. They look about the size of a one liter container and unscrew midway to reveal a removable cylindrical mesh filter. This makes it ...
...black plastic material and can easily cross thread, so be careful. They look about the size of a one liter container and unscrew midway to reveal a removable cylindrical mesh filter. This makes it ...
black with mold...gross. Second peel back the rubber on the bottom and you will notice 3 drain holes, clean them out they are probably filled with gunk (mold). The problem is that the rubber seal does
...washing out. Do it over and over until the water stays clear and then start using less soap. It only needs about a tablespoon for a full load. This is an easier solution for me because I have a drain ...
...guild on how much HE detergent to use,around 1/4 inch high,also if your washer stinks and maybe black buildup on the rubber boot that's from the soap also,i know you have an lg but this is what ...
...coming from the drain pump as it was in rinse cycle. I also found a small black piece of plastic in the filter the second time I ran a test. Are there 2 drain pumps or just 1? Also, how do I remove ...
...with a small flathead screwdriver and the panel will open downward. You will now see a small round black piece on the left with a flat screw head on it, about an inch in diameter. unscrew this about ...
Question about LG WM Washing Machines
...black rubber shavings under the washer. If the motor runs and the agitate and spin functions don't work, the studs may have broken off the coupler (old coupler design) or the coupler may have broken ...
2,568 questions posted
Usually answered in minutes!
401 Questions
243 Questions
245 Questions
234 Questions
195 Questions