Moen 24 In. Towel Bar... "remove set screws" Questions

Ad

Question about Moen Home

1 Answer

...you remove the eva towel rack holder The Moen YB2824 is attached to the mounting bracket with a set screw through the base. You would simply need to loosen this set screw to remove item from the

Ad

remove towel bars and hooks from wall. No set screw visible. We did not install them. Newer towel bars don't have set screws... Solution-slide off! There is an opening in the bottom of the bracket

Ad

...remove a Moen towel bar. It has a tab under the bottom but I dont know what to do There should be a "set-screw" (a very small screw) at the bottom of base (fat part) of the towel bar. It screws in to ...

...remove the Moen Eva towel bar from the wall using a flat head screw driver inside the slot (not a set screw) on the bottom section of the towle bar bracket. I was told by Moen to insert the flat head ...

set screw to loosen), remove the nut holding in the stem (or maybe the stem screws out), remove the cartridge. If it's not clogged it probably needs replacing. Oh, yes, first turn off water to fixture

...set or trying to figure out some way to work around the gaping hole the defective mount left in my wall and use the existing one (which I don't see happening as the strength of the wall is already ...

...Remove the locknuts that hold the faucet to the sink and lift the faucet out. Clean the area where the old faucet sat. As needed, install the new spray hose and supply tubes, if any, through their ...

remove the set screw and nothing comes loose to attach it to the wall. What am I missing ? Sorry to read about your problem, I hope this helps you out. remove the setscrew.. your paint must be holding

Question about Moen Home

1 Answer

...remove a towel bar that does not have a set screw on the flange cover? I think you grab hold of the rosette closest to the wall and spin it off, it should expose the set screw. If that isn't it, one ...

Question about Gatco Home

1 Answer

Remove the screws with a screwdriver, and take the mounting bracket with you. You'll need it to attach the hook to the new wall. If there is no set screw or hole visible from any side, then your Gatco

Not finding what you are looking for?
Moen 24 In. Towel Bar... Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Moen Home Experts

john h

Level 3 Expert

29494 Answers

Gene Lawson

Level 2 Expert

53 Answers

deton8 von Splosion

Level 3 Expert

3342 Answers

Are you a Moen Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...