LG DLE2532W Electric Dryer "set timer automatically switching" Questions

clothes do not dry on automatic setting clothes do not dry completely on automatic setting so I have to use the timed setting Sounds like you have a problem with the timer switch, it will control both

ll need to replace the timer. Turning the timer **** to off should stop the machine. Exception: If the shutting the door automatically starts the motor, then the start switch/relay is probably shorted

...set the timer My Kenmore gas dryer starts running as soon as I set the timer (without pushing the SART button. And when the timer gets to (0), The buzzer sounds and won't stop until you open the door ...

LG dryer won't shut off - gets stuck at 6 minutes I usually use the automatic settings on my dryer - but lately it is getting stuck at 6 minutes and runs and runs and runs. If I use the timed drying ...

timer knob not turning and its not heating up If you are setting the knob to begin a cycle AND the drum turns when you start it AND the timer knob does not advance, the timer is likely defective.Some ...

...shut down. Do I need to replace the control switch? The dryer was purchased 5/24/06 If you are setting the unit on automatic and the timer itself is not moving forward to the shut off position ...

...set time on timer switch any changes if not,timer switch is defective,timer switch has been short circuited it was malfunction,this timer swtich is where the power source activated when you switch ...

timer clock motor. Cams are often held in place with a set screw which might have loosened and it is slipping. Micro switch may have gone bad or has become disconnected. if bad it can be replaced with

...automatically start the next cycle of drying. The dryer works fine other than this problem. I'm having to leave the door ajar so it will shut off. Has the timer gone bad? If so, what are the steps in ...

...turn off and does not heat if the dryer is set to automatic cycle and it does not heat it will not advance be sure to check power for 220v , could be broken element , thermostats, timer , motor ...