Schiller Welch Allyn Cardiovit At 2 Interpretive Ekg Machine "ecg printer printing" Questions

...Ecg prints at some parts of the paper but some parts are not clearly printed,what's the problem? The thermal printer head is faulty.nyou have to replace the thermal printer. If you wish to get some ...

...ecg not printing. Okay brand new machine trying to at least print out a list of current settings. Nothing prints out! Help!! Turn on machine, wait a few seconds then press ALT-0-1-1 You will get a ...

ECG machine. It is not finishing the printing of the report. Its only printing half way then it just stops! The paper and printer door seems to be properly positioned. The motor on the other hand only

there is no printing hi, may be ur machines thermal printer head have some problem. also check the paper u have inserted. it should be a wax paper or chemical paper. ok

My Welch Allyn CP-100 ekg will not print-does it use toner or can something else be wrong hi, it doesn't use any toner. it give print using a thermal printer. if every thing working fine and not ...

...printer problem It will print for a short time on manual but will not print after an ECG capture. I gives the error message 'paper error, reload paper'. I cleaned the print head and paper sensor with ...

...printing out all the way the top prints but the bottom is blank, does it have a printer cartridge? the bottom off the print roller might be misaligned or worn. it could also be part of the print head ...

I think that the ink on my GE Mac 1200 EKG has run out. How do I replace it? Where can I get ink? hi, it doesn't uses any ink. printout is given by a thermal printer on wax or chemical paper. if print

...printing to light and skipping........do I need a new print head and how do I remove it hi, As it is a thermal printer, the printer head can become faulty. If so you will get a poor printout. It is ...

my cardiovit AT-2 PRINTS ONLY ON ONE CORNER ..... CLEANED IT .... CLEANED .... UNPLUGED.... CHANGED THE PAPER Try to print test pattern (ALT - MAN START). If it still prints only one corner than it's ...