...nails. They are always out @ 3/8" from the surface of the wood The Bostitch should have a one-touch depth-mechanism with seven settings. You should make the required adustment(s) to this mechanism to ...
Question about Stanley Air Tools & Compressors
depth adjustment for a bostitch modle mlll hardwood flooring nailer I take it your gun isn't setting the nails? Are the nails too long?Is the pressure on 120? Is there an adj on the air line? What are
Question about Porter Cable Air Tools & Compressors
...setting. Test fire a fastener and check depth. If a change is desired, rotate the adjustment knob (A) Fig. 19: the adjustment knob has detents every 1/4 turn. Rotate the knob clockwise (see Fig. 19), ...
Question about Porter Cable Air Tools & Compressors
...nails below surface I have adjusted the depth gauge, but nailer still leaves nail heads exposed about 1/16th inch (regardless of length of brad) ... air pressure settings between 60-100 psi have been ...
...setting in and adjusting depth control does not remedy. Usually occurs when the tip breaks off. Remove the head and pull out the driver to examine tip. If tip broken or bent, replace with new or try ...
15 questions posted
Usually answered in minutes!
162 Questions
29 Questions
25 Questions
27 Questions
32 Questions