...nail depth. Note: While it is at first glance easy to use, after switching the settings a number of times it may become apparent that the coarse settings lack the refinement necessary for smooth and ...
Question about Stanley Air Tools & Compressors
depth adjustment for a bostitch modle mlll hardwood flooring nailer I take it your gun isn't setting the nails? Are the nails too long?Is the pressure on 120? Is there an adj on the air line? What are
Question about Porter Cable Air Tools & Compressors
bn125a nailer not sinking nails all the way The depth to which a fastener is driven is controlled by the depth adjustment knob (A) Fig. 19 below. The depth of drive is factory adjusted to a nomimal ...
...nail head not setting in and adjusting depth control does not remedy. Usually occurs when the tip breaks off. Remove the head and pull out the driver to examine tip. If tip broken or bent, replace ...
Question about Porter Cable Air Tools & Compressors
...depth gauge, but nailer still leaves nail heads exposed about 1/16th inch (regardless of length of brad) ... air pressure settings between 60-100 psi have been used, but same results. Do I have a bad ...
15 questions posted
Usually answered in minutes!
162 Questions
29 Questions
25 Questions
27 Questions
32 Questions