Question about Whirlpool Water Heaters
...light mine is propane it works for few days then goes out i reset the pilot light and it will work for a few days Hi. Some of the whirlpool water heaters are notorious for having plugging problems on ...
light. Cannot hear or smell gas when I press reset button. With just the little information you left, my first reaction is that your propane tank is empty, but I don't know if it's propane or nat gas.
...light and make sure the thermocoupler is at the tip of the flame. hold pilot until the coupler bulb is nice and hot , release the pilot button nice and slow. If the pilot goes out, The thermocoupler ...
...light, Furnace register or outside drafts on windy nights. Some water heaters have an automatic shut down if the water heater gets too hot, so don't have it set to its hottest setting. Most water ...
...propane The orifices in the burner etc. are already set there. Be careful, it is gas. To change the control is easy, you will need a large pipe wrench to wrap around the whole thing and unscrew it. ...
...light, burner lights stays on for a while probably till it reachers temp then pilot goes out, its a rheem gaurdian 40 gal This covers just the basics on no burner flame or pilot outage issues on ...
...light the pilot it stays on for 20-30 seconds,then when i turn it to ON it lights the burner for 3-5 seconds then goes out,i replaced the thermacouple & the same problem still exsists Do you have ...
propane water heater model3 21VP4OE-1P that is acting up. The pilot lights and then the burner lights, but goes off after 5 - 10 seconds. It cycles like this 2 or 3 times, then stops while the exhaust
...light goes out irregularly it's a reliance 606 propane water heater If you still have your owner's manual, you will need to call the manufacturer. They will need the model # & serial #. This ...
7 questions posted
Usually answered in minutes!
282 Questions
46 Questions
41 Questions
21 Questions
16 Questions