Question about Staples Tools & Hardware - Others
...T50 STAPLER IS JAMMED HAS NO STAPLES IN IT TO SPEAK OF CAN'T GET IT TO WORK WITHOUT STAPLES NEED HELP ANYONE find a good.secretary or bring stapler to staples. some kids are good with high tec stuff. ...
Question about Arrow Tools & Hardware - Others
...staples in the gun. Chances are it was not shooting staples so you put more in. (Only holds 1 strip as if new from box) Check for a jam. Sometimes this keeps more staples from advancing. Please ...
Question about Arrow Tools & Hardware - Others
T50 staple gun to remove bad staples Typically you do not open these up. Makes it difficult to remove stuck or wrong staples. I have had good luck removing the staple ram rod and rapping firmly on the
...it. T50 doesn't hinge. Push in and down on the spring mechanism and it should come out. The staples are then loaded by inserting them on the rails that the spring mechanism was one. Hope this
Question about Arrow Tools & Hardware - Others
...T50 staple gun that I put some staples in. The staples are visible in the side window, but will not come out when I squueze the handle. I also cannot remove them the way they were inserted. Any ...
arrow t50 plunger won't fire Look closely for unwanted staples "jammed" into the unit.
Question about Arrow Tools & Hardware - Others
T50 and it is working fine. The staples are held together with an epoxy. I have used staples that are older than 10 years. The problem is the gun. Check for dirt or a burk in the magazine as well as a
T50 14 mm staples with the points facing up and out of the tool. When I pull the trigger, the led worklight comes on, I hear and feel the stapler pushing to eject the staple, but there is no staple in
Question about Arrow Tools & Hardware - Others
...hinged portion of the staple gun to see why it keeps jamming? (I know how to load and unload the staples) You will have to unscrew the fastener to get to the inner of the
27 questions posted
Usually answered in minutes!
65 Questions
28 Questions
15 Questions