Question about MotorGuide Electrical Supplies
24 volt motorguide trollong motor To get 24 volts from two batteries they are wired in series. A wire is connected from the "+" terminal of the first battery to the "-" terminal of the second battery.
Question about MotorGuide Electrical Supplies
24 volt system. How do I properly hook up the batteries. The two batteries are separate from the boat starting battery. To hook up to 24 volts you need to join a positive cable from one battery to the
Question about MotorGuide Electrical Supplies
...24 volt trolling motor only runs on 12 volts Did you connect 2 batteries to try the 24 volt version? You have to link them together like a flashlight, positive to neg and then out the other side, for ...
...24 volt trolling.My boat is wired only for a 12 volt.How should I run the wiring to two batteries just hook the two batteries up in series. To do this buy one short cable and use it to hook the ...
Question about MotorGuide Electrical Supplies
...24 volt and i'm pretty sure the batteries are hooked up correctly. The problem is when i turn up speed on trolling motorthe speed actually decreases. I think the batteries need replacing. After ...
Question about Electrical Supplies
...Which wires do i use to connect to a 24 volt battery system? It has a 12v & a24v switch on the side of the foot pedal. The white wire is the ground. The black wire is neg. and the red wire is
...24 volt battery. The positive wire or red from your trolling motor goes to the positive post on battery 1. The negative lead from trolling motor goes to the negative post on battery 2 then there is a ...
Question about MotorGuide Electrical Supplies
...24 volt selector switch and three wires to hook up to battery, a black, a white, and a red. i'm assuming on 12v setting of switch black to + and red to - terminals when i do this the motor doesn't ...
...24 volt trolling motor on my boat. When in the 24 volt mode, the motor works well for about 3-4 minutes the loses all power. After about a 15-20 minute "cooling off period" the motor will work again ...
Question about MotorGuide Electrical Supplies
24 volt trolling motor (motorguide) not working. Have 24 volts at receptacle in hull of boat but when I plug in the trolling motor and check the volts on the plug, I only read 6 volts. Any idea whats ...
294 questions posted
Usually answered in minutes!
627 Questions
549 Questions
535 Questions
166 Questions
208 Questions