Intex Krystal Clear Model 635 Pool Filter Pump 1500 Gph "pump air locked" Questions

Ad

...in the clear tube from the pump to the filter- put old pump back on same fittings & the old pump works ok you have to bleed the air out of the new pump before it will pump it has an air

Ad

Question about Pool & Spa

1 Answer

Pump air locked From set up Take lid if pump off, and fill with water. Put lid back on and start. if still won't prime, check orings everywhere Air can be sucked in. System should be tight, so no air ...

Ad

Question about Qca Spas Pool & Spa

3 Answers

...the pump to allow the air to release from the line. For more information on QCA Spas error codes and information see our guide at The Cover Guy on QCA Spas. QCA Spas Information and ERROR Code ...

Question about Qca Spas Pool & Spa

1 Answer

air lock ??? Just changed pump a month ago. FLO is a common signal for insufficient water flow through the heater tube. Do you see the low speed pump working? If you do, then try removing your filters

Question about Pool & Spa

1 Answer

...to break an air lock. The pump is at the bottom of the system so you can bleed the air out by just opening the drain valve till you get water out of it, just a few seconds. That should get you

Question about Pool & Spa

1 Answer

...pump has air in it. It is possible the it took air in when I was cleaning around the spa controls and turned it on for 1 second accidentally. Is there anything we can do ourselves? Do we need a ...

...pump, heater coil, air blower, light etc.Turn the breaker back onIf the circuit board stays on then you have to go thru the process of plugging one item at a time turning the breaker on then off to ...

...water well pump hums but willnot start shaft to well is free g.e.1h.p.pump motor for shallow water well You may have an air lock/bubble. Try priming the pump with water before you switch on the

Question about Emerson Pool & Spa

1 Answer

...spins but does not pump water, most likely you have an air lock.Try priming the pump with water or remove the air lock at the pump by removing the cover off the filter basket that is next to the

Question about Jacuzzi Pool & Spa

1 Answer

Cannot get the pump to prime If you have an air lock all you need to do is open your drain valve for a few seconds till it runs all the air out. I hope this help's. With out more info that's all I got

Not finding what you are looking for?
Intex Krystal Clear Model 635 Pool Filter Pump 1500 Gph Logo

360 questions posted

Ask a Question

Usually answered in minutes!

Top Intex Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66831 Answers

Are you an Intex Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...