Ingersoll Rand - Rand 1/2" Impact Wrench, Quiet Tool with Extended Anvil "gun working" Questions

...my hand and it will not turn or take the lug nuts off the car is the torque adjustable or is the gun just bad This gun shouldnt have an adjustment. If you cfm's from your compressor are enough.

...gun some times stops working and just blows air like a bad o-ring but i really dont know thanks The vanes in the air motor are worn. There is a flat spring that pushes the vanes against the cylinder ...

when the gun is under pressure it sticks and doesnt put any power to the end of the gun just makes noise? hi, the problem you are having is with the small fins that turn when the air hits them, these ...

as soon as the air is connected wrench starts turning. No trigger control. Thanks! a rubber seal/o-ring is either wore or broke inside or one of the internal components are stuck, do you regularly oil

...and not the other. The throttle valve in the air inlet can cause you not to get full air into the gun when you push the

I have model 261 3/4 in drive impact gun. When in tighten mode it doesn't work all the time. It does work and then it doesn't, all you hear is air. Air motors have plastic fins in them that make it ...

...The light on the front still works and I have swapped batteries and they all don't work in this gun, but they work I can hear a high pitched noise when I pull the trigger but it doesn't ...