...gets too hot it has a thermal cut-off inside so it won't burn up the pump. Once the motor has cooled down it will come back on. Look around the motor to make sure it has plenty of ventilation. If it ...
...hot that the thermal overload is turning it off? If so the pump should restart once it cools down.If this is a new motor on an old pump (replacement) it is likely to be:1.) Incorrect or loose wire ...
gets hot & the thermal cut-out shuts Emerson 1081 pool motor gets hot & the thermal cut-out shuts down the motor. What would cause this ? How do I fix ? one of the windigs in the stator has an
...is on a waterway pump on a 1998 beachcomber hot tub... The only way a motor will run backwards is if the motor gets wired wrong. all motors turn clockwise. Rod US Parts Center ...
Question about Pool & Spa
...the switch open circuit saving the motor. when it get cold, again it starts. If the motor is getting hot when works, the is a problem with the ball bearings. Change the bearings at Pump
...gets very hot also. Has not tripped the 20 amp breaker yet. A motor can run that hot and still be within the temperature it can handle. It likely has an internal overload device that will shut it off ...
my polaris booster pump just gets hot and wont run only 2 yrs old worked fine until today motor wont run I can hear it click on then it gets hot the motor is bad overheating need a new booster pump
...for the pump motor to be hot? Yes a motor that works hard will get hot and the harder it works the hotter it will be but if it gets too hot to hold a hand against there is probably something
94 questions posted
Usually answered in minutes!
774 Questions
131 Questions
104 Questions
113 Questions
78 Questions