Black & Decker Pivot Plus Cordless Drill/Screwdriver "forward working" Questions

working both in forward and reverse but now will only operate in the forward rotation. Assuming that it's within 2 yrs old, you can phone Hilti re getting it fixed under warrenty. Hilti has a warranty

...but yet good.? Could also be a faulty switch, only working in one direction. Also check to make sure the forward/reverse lever is connected properly and moving the appropriate part of the

makita 14.4v wont work in forward it works fine in reverse but not in forward any tips thanks I would suggest going to the Makita site and downloading a breakdown for this tool first. The switch ...

in all 4 and do a complete swap but most home improvement stores have no problem doing this) 3. The Forward and Reverse selector just above the trigger is stuck in the middle meaning, the drill is not

...working the switches Low/High, Forward/Reverse. Sometimes, the battrey can hang up a bit in the charger, resulting in a low, or no charge. Try a different battery, or recharge your existing battery, ...

...forward or reverse. Worked fine - then suddenly stopped working. If you are sure that battery is fine, problem can be in the switch or brushes. I would check switch first - open the driver, take 2 ...

dewalt dc926 hammerdrill chuck do not stay lock in reverse my hammer drill works on forward but unlocks on revers chuck should be replaced to parts # 33007575 newer style.

switch for forward and reverse only opperates in makita 14.4 cordless drill.only works in reverse your transmission has gone out

my impact driver when in reverse works fine but when in forward it will work for a few seconds then stop and keeps doing that. why? I'd be looking for a defective forward/reverse switch, or a bad ...

...impact driver. Does not go into reverse on 1st Panasonic EY7540 impact driver. When I switch from forward to reverse it keeps going forward for the first time after I press the trigger. When I let ...