Makita 10" Dual Slide Compound Miter Saw with Light LS1013F "circular saw stopped working" Questions

...circular saw stops running. I was using my 71/4 in. Craftsman circular saw to cut tree stump. Some dirts or rock may have gotten into it. Although I had tried clean it, the saw stopped running. What ...

...on my circular saw when I'm using it Your either pushing the saw crooked into the cut or the nut holding the blade it loose. Make sure you unplug it before you start fooling around with the

...circular saw when I press the switch, the blade sometimes work normal, sometimes doesn't move, sometimes move for few seconds, then stop Go online and replace switch. First tho check cord for ...

...circular saw in july 2009 stopped working and still has warranty Ace hardware where I puchased the saw will not exchange saw says I need to send it to the company but, I didn't buy it there how do I ...

...saw just quit working. Battery is good, the blade spins easily no electric smell occurred. It just stopped working. I am thinking the trigger, possibly brushes. Any thoughts? If it is a new lithium ...

...circular saw keeps tripping the GFI receptacle I am an electrician and have tested my daw for any shorts and cannot find any. When I plug into a regular receptacle it works fine, but when I plug into ...

...circular power saw works then stops working, then starts again. Why is this happening? Things to check: With the saw running, safely grab the cord by the boot and pull and twist it around. This is ...

...circular saw, the bolts are typically left-handed thread so it is the opposite of a typical bolt. This is because the blade spins to the right so if a normal bolt was used it would loosen as the saw ...

...circular saw? how do i stop the blade or engage the brake? some saws don't have a blade brake , i always take a pair of vise grips and adjust to grip blade tightly and hold or bind against housing ...

...circular saw when you pull the trigger switch it should "click" when engaged.. if you don't hear a "click" then you have to replace the trigger.... If it does click then it could be brushes, or a ...