...Pro ? Remove the tube that holds the flex-drive shaft from the front of the motor cover.Remove the rear engine cover. Remove the throttle cable from the carburetor. Mark and unplug any wires for the ...
...pro trimmer? How do you access the recoil spring? The starter rope normally rewinds automatically when the recoil unit is functioning properly. If the pull rope has stayed out, disassembly will be ...
...Pro weed eater. Never had any trouble whatsoever before. Now it's as though no gas is getting where it needs to go. Replaced the spark plug and changed out the fuel to be sure it didn't have ...
...pro sm30sb gas trimmer will not start it was running fine and then it shut off like you turned the switch off.and now it will not start Hi unklekenny68 Make sure you are getting spark at the spark ...
Question about Garden
...pro 705 started one time. now it will not start and is flooding. i check the spark plug/wires they are good. its new. whats is wrong new carb needed The carb needs a special tool for adustments Hi ...
head from my poulan pro ppb 250e. How do i do that. After all the bolts have been removed from the head, tap all the way around,(http://www1.mscdirect.com/CGI/NNSRIT?PMPXNO=4760615&PMT4NO=65151144
...pro bc230c-rs Howdy Geoff,There are basically 2 basic types of spool heads that are wound. This link will walk you through both types. Once you've successfully wound it once, it's not too ...
trimmer head I bought an autowinder to replace the Pro Cut II string head that came with my new unit, but I can't find any instructions, ANYWHERE, on how to remove the currently installed string head.
will not start, no spark try this test. take off the spark plug cap ( they unscrew ) snip a small piece off the ht lead ( as the metal inside will be chewed from the thread of the cap ) with a new cut
131 questions posted
Usually answered in minutes!
583 Questions
457 Questions
255 Questions