...remove the main cover and possibly more parts to access that area. Enter your model # info stuff on this search page and you will be able to see what is involved. Torx head fasteners hold the covers ...
...remove the Blade guard (item 40) if the belt doesn't fit over the head of the guard. There may also be a sprung idle tension pulley, which will take up the slack in the belt once replaced. Looks ...
...head turns. That is the direction you should turn the line dispenser to loosen and remove it to reload the line. Sometimes these get very tight and need a lot of torque to get started. You could call ...
remove spool from Troy Built TB525 ec how to remove the spool the nut on the trimmer head has left hand threads so you need to turn it like you would tighten most other bolts
...Remove your spark plug and check to be sure you are getting fire at the spark plug. You do this by grounding the plug on the head of the engine and pulling the crank rope, if you are getting spark ...
...remove head. seems that on the tb525, they used 3 heads over the production period. On mine, I had the slot above the head, but there was no deeper hole or notch to engage the screwdriver, etc. My ...
...remove top of cylinder head and put something soft inside the cylinder to stop piston from moving up and down; usually a towel and something stiff like a screwdriver to hold it from moving. After ...
...Remove your spark plug and check to be sure you are getting a bright blue spark at the spark plug.You do this by grounding the plug on the head of the engine and pulling the crank rope...watching the ...
550 questions posted
Usually answered in minutes!
623 Questions
215 Questions
193 Questions
129 Questions