Troy Bilt Tb70ss Gas Trimmer "primer bulb sucking fuel" Questions

primer bulb kit? There are to "input" attachments on the snap in primer bulb, a long one and a short one. One of the fuel lines has a small clamp on it. Which of the "input" attachments takes the fuel

...primer bulb? when I start the weedeater its idle up high and air bubble in the primer bulb and fuel lines and sometime it don't want to take the gas when i squeeze the throttle I replace a new primer ...

...primer bulb). Line from back of tank to back of carb still there. Which lines go where? Do not mix them up!! Doing so will bring debris into carburetor. Assuming the line from back of tank to ...

primer bulb and now my weedeater will not stay running and my primer bulb is not holiding fuel. Make sure the fuel line is a good fit to the carb. ... If is sucking any air at all it won't run right..

...and the prime bubble wont fill Sounds like you have an air leak. Either in the primer bulb is split or punctured, hole or leaking fuel line or primer bulb base, and is sucking air instead of

primer bulb the lines connect to. One sucks in and one pushes out. If you push on it with your finger covering one of the nipples, it is easy to tell if it is sucking or pushing. It will make a little

...primer bulb but doesn't get any fuel in it . check the fuel 'pick-up' filter in the tank to be sure it's not clogged or stuck inside where it's not in the fuel mix. check the fuel lines for clogs, ...

..., it will run, but stops when you let go of primer bulb. What's wrong, and how can I fix it ? It isounds like your primer bulb may have a hole in it and is alowing air to get sucked in in stead of ...

primer bulb on my craftsman weedeater an am not sure what line goes where on the primer bulb can you help also not the gas leaks out of carb hole where In regards to which pipe goes where, it's simple

...the primer bulb. the primer bulb has 2 connection 1 to the carb. and 1 to the gas tank. it sucks fuel thu the carb. and back to the tank. if it has a crack or pin hole it might start but won't