Troy Bilt Tb425cs 26cc 4 - Cycle Curved - Shaft Gas Trimmer with Ez - Start and Speed Spool "turn" Questions

Ad

Question about Ryobi Garden

1 Answer

...one is nearly guaranteed to be an idle mix adjustment. With the engine warmed up & idling, turn that screw in (clockwise) 1/4 turn at a time until you can hear the idle speed drop a little. ...

Ad

...Son messed with Adjustment screws and do not have the adjustment spec. for the screw labled LA Turn both screws clockwise, until they snug down. then turn them counter clockwise 1 1/4 turn. try ...

Ad

When starting a walbro 668 carb after the silver idle screw has bee replaced how many turns in/out should you start? Turn it all the way in GENTLY. If you turn it too hard you will damage the seat. ...

how to retunr ryobi strimmer 30 cc engine was not running properly so turned mixture and air screw back into cab then turnedboth screws 1 and a half turns back out running but just not extactly right ...

Question about Husqvarna Garden

1 Answer

...and started messing with carb. setting now it wont run. Most chainsaws and small engines are 1.5 turns out. You need to set the mixtures for the carburetor. You will find a Low and High adjustment ...

Question about Echo Garden

2 Answers

...THE CARBURETTER HAVING TROUBLE WITH THE MIXTURE SCREWS Start with the L or low speed screw at one turn and the H or high speed screw at two turns. To get good responce from idle play with the low ...

Question about Homelite Garden

1 Answer

how many turns out on aiir screw Hi. Normally to set any air screw, you will have to screw it in completely, and then start unscrewing it, counting the number of turns. To set, screw it back in, half ...

need to know low and high air screw adjustments Turn both of them in all the way then back them out one turn. This should let you start it. Then turn the high air screw clockwise until it begins to ...

Question about Garden

2 Answers

...outside one and an inside one. Do I: a) Screw them all the way in and then both out 1 & 1/2 turns b) Screw them all the way in, outside 1 turn and inside 1/2 turn c) Screw them all the way

Whats classified as a turn on a carburetor fuel screw? How many degrees? 360. But the best way to do it is 1/2 turn as that is easier to do with you hand and keep track of. Turning the screw in all ...

Not finding what you are looking for?
Troy Bilt Tb425cs 26cc 4 - Cycle Curved - Shaft Gas Trimmer with Ez - Start and Speed Spool Logo

161 questions posted

Ask a Question

Usually answered in minutes!

Top Troy Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Troy Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...