drive shaft has a problem Troy-Bilt 791-182833 flexible drive shaft has a little medal clamp at the end where the cutter is and it has come loose. Everytime I go to start up the machine it works for a
...drive shaft seated all the way into the power head. You will have to loosen up the drive shaft and push the shaft in but at the same time turning the trim head to fit it into the drive area, then ...
Poulan trimmer drive shaft attachment problem Square drive on the end of the drive shaft has to line up with the drive on the output of the clutch.
Question about Garden
...drive shaft appears to have a groove in it about 3/4 toward the top. I surmise that notch is where a broken/missing set screw or "c" clip would most likely hold the shaft to the drive cable. If you ...
Question about Ryobi Garden
...drive shaft disconnected from motor The drive shaft (internal shaft inside the housing) was not turning when I put on a brushcutter attachment. I put it on my bench and was able to pull the shaft out ...
drive shaft is not seated into position properly or the shaft has broken. Have you had the shaft off recently? If so, take the shaft off again and try to seat the shaft as you gently pull on the rope.
...head will not turn. Check drive shaft. Some models have a flexible cable drive shaft that is prone to breaking. also make sure the drive shaft is engaged in the clutch drum and in the gear head
...that clutch will wear out and not grip sufficiently to drive the shaft most cutter heads do not suffer problems other than to get loose and work down the tube thereby allowing the square drives to ...
...drive shaft which turns the trimmer head. If the drum is not turning than it is the clutch, if the clutch is turning the drive shaft could be broke, if the drive shaft is not broke than the problem ...
161 questions posted
Usually answered in minutes!
623 Questions
420 Questions
215 Questions
193 Questions
