Craftsman 25cc Gas Line Trimmer "replace chainsaw fuel lines" Questions

...replace fuel lines on Jonsered trimmer model GT 21L The fuel lines that go from the fuel tank to the carb and the primmer are cracked and leaking fuel. How do you replace them? if it's electric, it ...

...358352680 18" 42cc chainsaw, where does it hook up on the carb Here is a Link to my Fuel Line Replacement Tip: www.fixya.com/support/r6078121-fuel_line_relacement_trimmer_weedeater Good Luck! ...

...fuel to leak at cap vent. Would like to obtain parts manual i recently worked on a chainsaw that i was putting back together and got the primer bulb lines crossed, it was backwards to the way it ...

fuel line routing for craftsman chainsaw 358.350370 need to know the routing of the fuel lines. where does the fuel line with the filter on it go? where does the line with the fitting on it go? primer

...chainsaw stalling out after about 15 minuates of run time. Your response was possible fuel tank breather or the ignition unit. Many fuel tanks "breathe" through the gas cap.  It lets air in, ...

...replace the fuel lines on a 25cc Model 358.795591 Craftsman gasoline weedwacker. Took apart and did not remember/write-down how go back together. Bought new tubing from Sears parts store. Two ...

...chainsaw, weedeater, lawnmower...... will only run on choke the unit is starving for fuel. There can be many reasons for this. I'll try and list a few reasons and possible solutions. #1 reason is the ...

...Replace your fuel filter if you have one, normally they are located in the fuel tank of chainsaws and weedeaters.When you remove your fuel lines from the carburetor be sure to make a drawing to how ...

...Replace your fuel filter if you have one, normally they are located in the fuel tank of chainsaws and weedeaters.When you remove your fuel lines from the carburetor be sure to make a drawing to how ...

...Replace your fuel filter if you have one, normally they are located in the fuel tank of chainsaws and weedeaters.When you remove your fuel lines from the carburetor be sure to make a drawing to how ...