...turning wrong way The blade drive belt on your MTD edger makes a half twist in its pattern. When the belt was installed, it was twisted the wrong direction. Remove the belt from the blade pulley and ...
...belt that turns the blade shaft. When I try to loosen nut, blade spins. There seems to be no way to loosen nut. The edger I had in the past had a slot for a screw driver to stop blade from turning, ...
...cut into the ground, when i use it it stops turning when it touches the ground check your belt than your idler pulley and spring. if this is a clutch drive you may wont to check the clutch spring ...
belt that turns the blade on a Sears Craftsman lawn edger # 536-796516. After 10 years of intermittent use, I replaced the belt and it broke after 20 minutes of use. Looks like it burned up. I thought
Blades do not turn Bearing could be out on deck if a rider may have to replace spindle assembly or a if it is not engaging to turn on the blades check cables and belts. On a pushmower a key could need
the belt isn't tight and when i turn the blades on it doesn't work Which model of trimmer do you have? Gas or Electric? Have you opened any part of the casing?
kompernass Engine runs but driveshaft does not turn head Sounds like broken gears, belt, or clutch. Remove and replace broken/worn parts.
I am trying to get an idea on how hard it is to change a drive belt on a wheelhorse model 520H. Model # is 73501 and the serial is 69000167. On a scale from 1-10, what is the ''degree of difficulty''.
Need a manual or is there a diagram for belt replacement on an older Ariens ST824 snowthrower? The belts are badly frayed, twisted and jammed, I cant turn the engine because they are so jammed. You ...
kompernass Why if ?Engine runs ok but driveshaft does not turn the head Maybe a belt slipped off or broke.
916 questions posted
Usually answered in minutes!
1,998 Questions
1,006 Questions
710 Questions
285 Questions
244 Questions