Question about Ingersoll Rand Air Tools & Compressors
...RAND COMPRESSOR CUT OUT ON LOW PRESSURE OIL MODEL:SM75 INGERSOLL RAND SCREW AIR COMPRESSOR Low oil pressure. Are you adding a lot of oil. Have you check the oil level. Switch could also be
HOW TO RESET LOW OIL LEVEL SWITCH? If this is an I.R compressor the switch should reset itself once you add oil if it dont you may have a bad switch
Question about Ingersoll Air Tools & Compressors
...unit I would look at the pressure switch. If you are saying the unit starts/stops/starts etc and it is equiped with a low oil level switch the oil level is low. fill it to the oil fill plug
Question about Ingersoll Air Tools & Compressors
Need wiring diagram for 'Low Oil Level Switch, part # 32276313. trying to find diagram for you. LOLS will be wired in series with pressure switch.
my 2475 will not start up, I can override that by pushing the button on the Contactor Does this unit have a low oil level switch? If so make sure it's full of oil. If not you have a bad starter coil.
Question about Ingersoll Air Tools & Compressors
...have a good handle on how much oil it uses. you may also be able to remove a plug usually on the front of the case lower left side and install a sight glass or low oil level switch. Have a good
Question about Honda Air Tools & Compressors
...Is there a easy check for the switch? Or what ever ? Hi,I have an Ingersol compressor with a Honda 5.5 and found they have a low oil shut off switch.Make sure your oil level is up to normal
...low oil level switch has been installed. You should fill this unit to the bottom of the oil fill plug threads. It's less than 2 quarts. IR does have a spec sheet that tells the exact amount. I don't ...
low oil level from separator or scavenge line plugged. 2- A plugged oil cooler. Dirt and debris pushed against the cooler by the the cooling fan. This needs to be cleaned using a pressure washer. Wash
27 questions posted
Usually answered in minutes!
69 Questions
79 Questions
34 Questions
24 Questions