LG LRBC22544 Bottom Freezer Refrigerator "water sticking" Questions

...water or ice is sticking. The second problem that could be is the water solenoid that comes on and should close off fully is sticking open and allowing water to drip and not shut off completely. This ...

...is leaking while turned off or if the dispenser control board is sticking with the power turned off. Your model comes with 2 different choices of water control valves.let me know Thanks, Sea ...

...sticking water lever or a bad water valve. the lever can be changed from the front and you should know if it sticks. the water valve can be replaced from the rear of your unit. it is the plastic part ...

water dispenser sticks My water dispenser sticks and floods the floor You should spray the mechanism with some PAM or other similar cooking spray. This will act as a lubricant. Spray it into the hinge

...leaks water through the drink outlet every time ice is made. Is this also linked to a sticking outlet valve.??? same prob linked to previous posting Check the water dispense lever, could be ...

...sticks on our Samsung RF266AEPN is about 3 years old. About 3 months ago, the water dispenser started sticking on. Runs for about 5 more seconds after you pull your glass away from the switch. clean ...

...sticking open and defective. If you also have ice and water through the door, this is a dual solenoid valve. If it does eventually stop, your ice maker could be sticking in fill mode. Either way this ...

water will not shut off from the dispenser, had to cut it off from the wall You have a problem with either a sticking dispenser switch or a sticking relay problem. You will need to have a qualified LG

water was coming from when I happened to notice along the back wall closer to the bottom is a sort of ledge or track sticking out. if you look at the center of that yopu will see a tube that runs down

...together in the freezer? How can I remedy this situation? the ice cubes stick together because the water level in the tray is to high and the cubes can not be separated so turn the valve on the wall ...