...cord won't recoil to proper position. remove the cord assembly ,, either the cord is off track and needs to be rewound or it broke and needs ...
...won't rewind the cord? You have to tension the spring before installing the cord. Remove the cord. Put the recoil assembly in a vise. Prepare the ends of the cord so they can be threaded into ...
won't start pull the cord and it does not want to 'spring' back, also does not even pull past a certain point as it used to.. cord not broken, seems to be something with the engine
...cord replacement 3.5 hp engine Sears technicians can repair Briggs and Stratton cords fairly easily and it won't cost you much either. I had mine serviced last year and it took about 3 weeks and ...
Murray lawnmower 300Series 4.50 prime n pull engine. The starter cord to tight won,t pull out Check your under side. For grass builtup
...cord stops, Troy built- Briggs/Statton 21 inch self-propel lawnmower. The mower's drive shaft may need to be lubricated. If you turn the mower over and try to move the blade by hand (with the ...
Won't start, makes a clicking sound when cord is pulled to start. Found some oil under the engine. How do I fix my problem to get this to start? sounds like there might be an unexplainable hole in
...cord won't retract Pull cord won't retract Hi Susan. It sounds like the spring has either snapped or become un attached. It's going to be a two person job to re do it. It may be worth while going ...
cord hard to pull and won't reel back in Brand new out of the box. I haven't even put gas in it yet. Pull cord is hard to pull and won't reel back in, I've put a little oil
Question about Briggs & Stratton Garden
the pull chord on my mower is frayed and now it won't recoil all the way. i cannot start the mower classic 450 series mower go to replace pull cord follow instruction
787 questions posted
Usually answered in minutes!
213 Questions
216 Questions
140 Questions
63 Questions