Poulan "Poulan" Push Mower "kill switch work lawn" Questions

...the spark plug and the stop cable. The battery is fine and I checked the ignition module and works as it should. check for a faulty wire to the engine kill switch it may be contacting the ...

...kill switch is stuck in the open position. Lube the cable and check the kill switch Get some WD40 and trace the cable back to the motor. Look at the kill switch assembly and locate the pivot point on ...

turn elimiate seat and brake safety switch now the engine kills when i use the pto can i elimiate that switch? It would work properly if you enable all the safety switches like it was designed to work

...it to engine brake, and this is also engine kill switch. sounds like this cable has stretched. this cable controls engine brake and also kills the spark. you have two problems, and this controls

...kill switch off from under the seat and wired it direct could that be it it always worked on my other mowers but they were not crftsman Reconnect it they put it there for your safety... Good

...kill (stop) switch or a short in the wiring. If you replace the ignition coil the air is .010 -.012 normally on most small engines. try squrting some starting fluid in the carb if it runs and shuts ...

cub cadet lt 1042 engaging pto kills engine Sounds like your safety switch under your seat is not working or is unplugged.

for broken kill switch wire or loose connection on same wire.  2. check for loose or corroded wires on switch. 3.If this unit has a stator and mag polish the surfaces of both and check clearances

Kill switch was knocked from it's mounting bracket and worked at first but then stopped working to kill the running engine. How do I tell if I need a new one? Remount it and reconnect it to ground and

...kill switch is similar to a ski-doo in that if you fall off the key is attached to you and it pulls out and kills the engine. Any ideas on what to check to see if I can fix the problem? see if there ...