...These cabinets(casing) are very specially made, if you try to open , and replace battery, it wont close well, however if there are mini screws, usually found concealed with a label , remove
wont turn on I suspect that the batteries need changing. When you install new ones, be sure they are facing the right direction.
it won't pump air due to some mechanical problem the pump wont pump air just replace rubber like substence in that monitor
my model bm35 wont hold air It pumps and looses pressure before it reads Check cuff and hoses for leaks.. Submerge cuff and hoses in water and pump up looking for bubbles. Bubbles=hole.
Pump wont start and I get an E-1 error You need to make sure that the little arrow is right over the artery, that will stop the error codes..... Guy :) please let me know if this does not fix, but it ...
wont inflate Have you changed the batteries, recently? If not that may be the problem. Most of the Walgreens brand Blood Pressure Monitors are manufactured by HoMedics and have 5 year limited warranty
Question about Moore Medical Health & Beauty
sphygmomanometer is settled at 190 and the pin wont calibrate no matter what i try. It needs a service, but it would be better to throw it away and buy an electronic one. The one you have is ...
my homedics model 518732 blood pressure monitor has the deflate arrow on and it wont allow me to inflate the cuff to take my blood pressure. Dont know how to reset it. In this case, you need to ...
wont hold power for more than 10 seconds after switching it on The battery is probably dead. Suggest changing it.
it wont shut off it froze Remove the battery. Wait five minutes. Replace the battery.
76 questions posted
Usually answered in minutes!
