...Max-E-Therm High Effiency - Gas Heater - 400,000 BTU Model SR400NA. When the heater turns on, the display shows a pool temperature of 109-110, which means I cannot get the heater to blow. The water ...
Question about Sta Rite Pool & Spa
...Max E Therm Pool & Spa Heater gauge stuck? gas main was shut of for tenting of termites....after gas turned back on temp gauge is reading 126 degrees....no service lights are on....the blower motor ...
temp and the heater won't come on With these particular pool heaters, troubleshooting without specifics is very difficult to do. The users manual actually has a flow chart that walks you through, step
Question about Pentair Pool & Spa
the max temp. after you turn power on press button. the green pool light will light up, at this point using the arrows adjust your max temp. press button again to change to spa, press again to operate
Temp 400K Propane with an Intellitouch and the heater shuts off at 84 degrees. Do I need to set a max temperature from the heater control panel? If this heater has pool mode and spa mode as an option,
...Max-E 400. Pool temp is about 75 Ref: Sta-Rite Max-E 400. Pool temp is about 75 deg, but the water temp reading on the control panel climbs to the high limit (104 deg), then heater shuts down Your ...
...temp sensor has gone bad. This is located on the side of the water manifold and the wires run back to the control board. You can order one with a model number from your local pool store. These are ...
I turn my pool heater on and it says the pool water temp is 104 when it is 80 and the heater will not igntite how do i fix this change water tem sensor
72 questions posted
Usually answered in minutes!
193 Questions
170 Questions
177 Questions