...will go to the ''service mode''. sounds like a flame sensor.remove ignitor assembly and clean with fine emory cloth or steel wool.when properly cleaned it should feel smooth for entire length of ...
...and HS and the service light is on. Prior to this happening I was unable to switch from standby mode or pool or spa mode.What can I do about this? clean the filter turn breakers off for twenty ...
...after 10-20 seconds It was running on recycle mode but not on filter mode. I opened up filter and cleaned all the built up DE then back washed. It lit then went out. Now even on recycle it ignites ...
chlorinator has 2 green lights but reads -100 . is this okay, shouldn't it say +100? -100 is fine. it just means it is in reverse polarity, or self cleaning mode.
...mode, trying to operate the heater from the control system, the heater will not turn on. If all is in working order be sure your thermostat is turned all the way up on the heater itself and be sure ...
auto chlor RP 92 QT The green lights for the cell won't come on after cleaning the cell. The chlorinater is on stand by Just a note, if water is cold, there is an Automatic "Stays Off" mode when water
...doesnt hav sleep mode wont heat make sure filters are clean make sure recirculation pump is working make sure it is calling for heat if not check temp sensor iff all working check heater ...
179 questions posted
Usually answered in minutes!
193 Questions
170 Questions
72 Questions