Waterway Above Ground Hi Flo Pump "motor shaft turning pumping" Questions

...shaft where it passes thru the pump and motor and look for signs of rust from a pump seal leak. If you are not familiar with testing these parts your best bet would be a local electric motor repair ...

...motor shaft by turning the impeller while keeping the shaft from rotating. There is a brass shaft coupling embedded in the back side of the impeller. This allowed me to remove the leaking seal ...

...motor shaft. In my case the impeller was so caked onto the shaft with rust that we could not loosen it. We broke the impeller and still could not unscrew it. The screwdriver keeps jumping out of the ...

...motor shaft. First replace the through bolts in the motor. These are the long bolts, they will just cause headachs. On the back of the motor their will be a place to hold the shaft from turning, If ...

motor. Try to turn the shaft by hand. Is it free to turn? If so, the problem is inside the motor. If not, look for the obstrction. A local electric motor repair shop can help you if you find damage in

...pool pump motor repair guy and have him replace the shaft seal ..BEST CHOICE $20 and ask him how 2 take better care of it (priceless )..hope this helps ...  jay the pump repair guy in longwood ...

...still have problem Pump motor is jammed causing overload and resulting breaker trip. Try to turn the pump shaft by hand, it should be very easy to turn. If there's any resistance check for

...motor shaft has rusted in place. Remove the pump and try to free the motor shaft. If there is rust around the shaft spray in some wd-40 and let it sit a while. At the far end of the pump is small cap ...

...motor shaft. Any ideas? You need to get to the shaft at the back of the motor to hold it while you use water pump pliers or the like to turn it off. It will unscrew in the regular direction but if it ...

...motor cover, you will need pliers and a 7/16 open end wrench. The opposite end of the impeller has a shaft that has to be secured by the wrench. The shaft has a notch on each side, it could be behind ...