how do i take the motor out of a simer pump 2305 after removing the screen cover on the bottom? I threw it in the trash.
Simer submersible utility pump Model 2300-03 motor sticks. Only pushing the impeller makes it to work. Is there a repair kit relating to this problem? take screws off the screen on the bottom of pump.
it starts good? but can't stop itself. I have to lift it up to stop it manually. lifetime warranty will cover this? where should I go? Simer pumps website has a nice trouble shooting section and you ...
Brand new Simer pump Model 2330-03 runs 10 seconds shuts off, turns back on, runs 10 seconds shuts off, etc., etc. Why is this happening? Sounds like a faulty switch on the float. Try to hold the ...
what kind of oil is in the motor of model 2300 simer geyser pump? Can I buy oil and fill it up? I took it apart because it was clogged and all of the oil ran out, I'm not dumb, I just do dumb things ...
My simer model 3986 ocaisionally does not start, is there anything that needs to be cleanded or lubricated with the switch mechanism? Does yours have a float or internal switch on the bottom to turn ...
hammering sound at shutdown why does my 1/2 hp simer submersable sump pump make a hammering sound when its done pumping water? from jj it has a check valve to keep the water from going back into the ...
My Simer 2300-03 has been great except that it overheats after awhile. Too little water?? Yes. I recently used a similar pump (Flotech 1/6 hp) running for about 24 hours - but it came with this ...
I have a simer pump 120 volt 60 hz 1/2 hp ser #70285 and the flot is getting stuck on and the pump wont shut off what can I do and where would I get a nother flot at take a tie strap and readjust the ...
is there a float or anything to adjust that will allow for a lower water level when the pump is not running. I have a simer stainless 1/2'' the float will only work when the pump is running
26 questions posted
Usually answered in minutes!
1 Questions
4 Questions
5 Questions
4 Questions