...error code 126 All of a sudden my pool heater is not working. When I opened the pool about a month ago it was fine. Now I get a display code of 126 and it won't turn on. I've seen this commonly ...
...power, display quickly read "r=5" then "126" which is where it is today. Display still won't turn off. those readings are not error codes. if display wont turn off you have a prob with display ...
error code 126 I have the same problem with my hayward pool heater. It's on - not heating though - i can change the temp up and down but then it immediately displays 126! What's up with that. And the ...
Question about Pentair Pool & Spa
...error code r 13, after this it say's spa on but the temp reads 126 and the water temp is only about 68 so the heater never comes on. This is not an error code. 128 r13 is the normal programming or ...
error code 126 thermister problem
...126 These codes indicate that you have a bad temperature sensor. Once replaced, the error codes will go away. This is an easy do it your self project, or it may still be under warranty. Check with ...
...126, so I'm guessing that this is not allowing the gas to light. I'm not getting any error codes and I'm able to turn on and off the unit, and also adjust the temperature, but till will not ignite. ...
...error code 126 on 300 model This could be a temperature sensor issue, however you should open the panel and look at the ignition control module, there is a red light that will flash and based on the ...
Pentair mastertemp 250 heater showing 126 I don't think that 126 is an error code but more likely it's showing that as the temperature. A new temperature probe will probably be the fix.
70 questions posted
Usually answered in minutes!
102 Questions
61 Questions
34 Questions
31 Questions