Pentair 2" Pvc, 3 Way Lube Free Diverter Valve, with 2.5" Slip Outside "pool filter stuck" Questions

...filter which did not solve the problem.I have to dismantle and clean to backwash. that means the filter is sendind sand back to the pool if it does the filter latteral must be replace . not a easy ...

...pool filter Restriction before pump impeller or clogged impeller. Check: Dirty skimmer basket, not enough water in pool, stuck weir gate in up position, plugged pipe coming into pump, if in ground ...

...pool now the skimmer does not have any suction-- water blows out other side just fine and I have gotten all air out of lines--- any ideas Depending on how much you vacuumed, your filter may just need ...

...help me with a solution some pool cleaners do this and it is a design problem could be a hose length problem , pump suction problem , dirty filter problem or the unit is not good enough for the ...

...pool from the return line from my Hayward s200 filter and the water won't clear up? Where can it enter the return?? There is a tiny hose inthe filter ... it is probably stuck in the sand and is ...

...filter for the pool along with a Pentair Mini Max 100 pool heater - first time starting both for the season and the filter motor is making a straining noise. For the few minutes its runnning the ...

...the polaris cleaner? It sounds like you could have some debris stuck in the impeller on this pump. This is a common problem and anything that gets past the pool filter can end up stuck in this

filter I have air bubbles at pool discharge and reservoir about 3/4 full and air is evident. Do I need to start digging up my skimmer line or is there some test I could do to verify my thinkings? When

...pool your setting is more than likely is not in the right position handle on top of filter has a sprocket under handel which is either not seated or has damage to it try turning handle to different ...

...filter stuck The spa filter could be stuck for a couple reasons.  If it's a canister type, then its just pressure. Release the pressure valve, pry the cap off, filter comes out.If it's ...