need wiring diagram for BN34 motor 2 speed 1.5 hp 230 volt Usually the wiring diagram is on the nameplat of the motor. I hope this helps.
...diagram on the inside or outside of the motor housing. There is a simple wiring switch that you can do to change the motor from 110 to 220 or vice-versa. Everything you need to know is on the motor. ...
wiring diagram on the pump motor or in the instructions and its been a while since I replaced one. If you just bought this then there will be a diagram on the motor nameplate and/or under the terminal
...wiring diagram on the outside of each motor explaining that and it is clearly not on yours. I would go to the motor Mfg website to get a wiring diagram for your particular brand. Rod @ US Parts ...
...wiring diagram for the motor is shown on the motor nameplate or inside the motor end cover. Unfortunately the diagram is not in the owners manual but this document should be read because it provides ...
...110 V from 220 V. Thanks, Pat Is there a coverplate where the wires come out of the pump? If so, remove the plate and there should be a wiring diagram inside for both the 110 or the 220V
diagram under the wiring cover. This is not an A O Smith motor. Email me at [email protected] and I'll reply with the .PDF from AOSmith. You need to move a couple of wires but as they say, a picture
Question about AO Smith Pool & Spa
...hp motor P# 8-159069-01 that I need to change the rotation. I do not have a wire diagram 231/115 volts, it is wired for 115 normally, you don't change rotation, you only have a couple of voltage ...
...motor should be a diagram pump is wired from factory for 240 volts if wiring 120 volts you have to chenge the brown and white wire see diagram then black goes to F1 white goes to F2 where white wire ...
47 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions
