Emerson THREADED SHAFT UP RATED - 1.00 HP - EB228 "pump prime switch" Questions

Jacuzzi Magnum Force Pump not working Jacuzzi Pump for inground pool, we tested last night & it kicked on, this afternoon I turned it on & it again kicked on, but the basket wasn't primed ...

...pump has probably lost its prime. This is either because it got too much air or not enough water. Try priming. This should make your pump start working again. Any time pool pumps have to be services, ...

...it over to backwash quickly. You may be loosing prime. DO NOT RUN YOUR PUMP IF YOU DO NOT SEE WATER IN THE PUMP HOUSING YOU WILL DESTROY YOUR PUMP. Please rate me if you find this helpful,

...you area for your local pool pump motor repair guy with free testing.. a repair to the motor should cost 20-85$.. remember to prime the pump after a repair.. jay Florida . hit the yes if i was of ...

PRIME THAT PUMP AFTYER ANY PUMP REPAIR !! THERE NOT SELF PRIMING UNTIL THERE INITIALLY PRIMED IN FIRST PLACE !!! AKA PUT WATER IN THE PUMP !.. IF I WAS OF HELP CLICK ON THAT (YES) BUTTON ON THE BOTTOM

...it will rush back through the system and blow the prime right out of the pump. Quite often you will see water blow out of the skimmer or just blow the skimmer lid off. I hope this helps. Good

...water well pump hums but willnot start shaft to well is free g.e.1h.p.pump motor for shallow water well You may have an air lock/bubble. Try priming the pump with water before you switch on the

priming my pool pump my pump is only working half power Is there a switch on the back of yor pump to select low power? How do you know it is working at 1/2 power?

into the skimmer when you start refilling it. You can get it to prime by loosening the discharge side pump union until the air is out, then re-tighten. The FL2 code is a "flow" error for the circ pump

...switch fault. If you have just filled the tub, the pump may not be properly primed. The best thing is to fill the tub through the skimmer when you first start filling it, that ensures the pump is ...