The labels at the top of my pool has faded. I don't know which slot is for backwash? Does anyone know which slot is for what? I need to re-label my lid to know which one is off, on, pump, backwash
No water coming out when I backwash. I cleaned No water coming out when I backwash. I cleaned the filter basket at the pump, filled it back with water, and then tried to backwash. nothing. switched it
I have a brand new S244T sand filter. During backwash cycle large amount of water discharges out of the waste line. Filter doesnt appear to be backwashing normally. Hayward is sending a replacement ...
backwash, the water comes out clean. When the pump runs in the filter mode, it releases bugs and dirt which should have been backwashed out. We did replace the multiport valve head since we had a leak
sand in backwash while backwashing my above ground pool i noticed a large deposit of sand had come out of the backwash hose. does this mean it's time to change the sand? You need to replace the seal ...
...backwash pipe. Turn the pump on briefly to see which pipe water comes out. Shut the pump. Put discharge hose on that pipe. Turn pump on until pool is low enough. Return backwash valve to filter ...
...rinse and waste, but no wtaer comes out. The backwash hose goes to a sewer drain. What could this be? A new Multivalve gasket (Or Cam) may be needed. you will need to disassemble the
...after floccing. How do I tell if the water is being filtered or if the filter is working correctly? Backwash the filter. If the water coming out of the backwash line is not dirty you need a sand ...
9 questions posted
Usually answered in minutes!
1 Questions