...thermal overload switch", which is an automatic reset. So if your pump motor is overheating, it will turn off, but once it cools down enough, it will reset automatically. some styles of the Dynamo, ...
Question about Aqua Pool & Spa
...it goes on again Check for restrictions causing the pump motor to be overworked. Motor is overheating, the the Thermal Overload Switch senses that and will trip. Once the motor cools, it will
...are it would cost more than the motor itself. Largest causes of thermal overload are. -incorrect wiring -wiring to wrong voltage -incorrect wiring size -bad motor windings -bad rear end
thermal overload problem. If the motor is fan cooled, it may be blocked or clogged with grass. If the motor has become wet inside this can also trip overload. That may be a shock hazard, so the source
Thermal overload, contactor, relay, centrifugal switch, etc, tested and replaced if needed. You can order bearings and capacitors from several places online, other parts can be harder to find. I local
...filter turns off after about 30 minutes, it seems to get hot and then will not turn back on for many hours. the pool is new. The thermal overload switch on the motor is bad. Take back for
Question about Aqua Pool & Spa
...Thermal Overload Switch: Something is creating an overload on the pump. Once it is overworked, the motor will overheat. This will be sensed by the T.O. switch. Once the switch senses that the motor ...
...a bigger pump? Sounds like you have done eveythig correctly - since the pump is new I suggest you contact the seller of the pump, or the local service agent as it could be a thermal overload
About how long should and or can a sump pump run before the thermal overload switch shuts the motor down? as long as there is water to cool it it shouldnt get hot
54 questions posted
Usually answered in minutes!
774 Questions
131 Questions
104 Questions
113 Questions
87 Questions