Pentair Minimax Ch 400,000 Btu Propane Pool Heater Millivolt Ignition "bypass propane heater switch" Questions

Ad

...water exiting unit the most common problem with these heaters not starting is the pressure switch. you can easily bypass to test it but under no circumstances allow the unit to run with it

Ad

Question about Pentair Pool & Spa

1 Answer

...bypass and hook it up the right way he said it isnt working anymore. Any ideas? yor heater has 3 high limits and a flame rollout switch(aka thermal fuse). be advised that bypassing safetys is not ...

Ad

Question about Pentair Pool & Spa

1 Answer

...propane heater. It will not turn on to heat the water. I have to bypass the pressure switch. Then sometimes that works. When I bypass it. It will take awhile to fire up. I have replaced the pressure ...

Question about Hayward Pool & Spa

1 Answer

...Bypass Operation". On the back of the control module there are some "dip switches". They have an on or off position. Check switch number 2. Make sure it is in the "off" position. The "on" position is ...

Question about Jandy Pool & Spa

1 Answer

bypass on the heater make sure valves are in the correct position to allow water to flow through the heater. If you are CERTAIN that water is flowing through the heater, and the LCD still says no flow

Question about Teledyne Laars Pool & Spa

1 Answer

...heater is only 2 yrs old. Thanks try bypassing pressure switch, if htr fires,it is either faulty or out of adjustment.storm should have no effect on a millivolt heater unless it took a direct ...

Question about Teledyne Laars Pool & Spa

2 Answers

bypass all safety's with strap main burner lights. I have bypassed each safety one-by-one but this don't help isolate problem. have changed 750 volt thermopile. I have cleaned pilot orfice. I read 629

Question about Pentair Pool & Spa

1 Answer

...heater. I would try to bypass the limit switches and see if that stops it, but it is dangerous. If you feel capable enough to try, only do so if there is a pressure relief valve on the header (does ...

Question about Teledyne Laars Pool & Spa

1 Answer

...good water flow through heater make sure if you have a bypass it is closed half way if not check pressure switch to see if 24 volts on both wires if not bad pressure switch or clogged copper line to ...

Question about Teledyne Laars Pool & Spa

1 Answer

...heater Model LD25ON. Nat. Gas It was working and then shut off. The pilot generator glows, but it never fires up. I have bypassed the pressure switch and still nothing. I did here clicking. I also by ...

Not finding what you are looking for?
Pentair Minimax Ch 400,000 Btu Propane Pool Heater Millivolt Ignition Logo

55 questions posted

Ask a Question

Usually answered in minutes!

Top Pentair Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Pentair Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...