Jandy Aqualink Rs4 One Touch Control System Control System "time mode" Questions

...settings between Ec, St, and Slp. You will have to do the above each time to go to next Mode. If the above does not work, then try pushing the Jets button instead of Mode/Light

...Pump will shut down after Scheduled Stop Time and start again the following day in Auto Mode. high speed is an aux and low speed should be another aux if to run all day designated program to each ...

...time in pool mode. Water is pulled from the pool, heated and goes back into the pool and spa. if you want it to heat from the spa put in spa mode let it get up to temp then put it in pool mode so the ...

...mode when it rains every time it rains or in foggy conditions, our heater goes into service heater mode. Power is still on. turning the heater off/on will start the heater but it will go back into ...

...mode with Boss control and it heats the spa. Now it works all the time no mater what. I can manually switch from pool to spa. How do I get it to be in spa standby mode? check the conection to your ...

...Time out is simply a manually entered mode, that will bypass automation for only 3 hours, and will return to normal "Auto" mode after those 3 hours. Why is this function available? If your pool ...

...filtration mode and you may want to change that to economy mode and then set your filtration

...time-out, or service mode. When the main controller is in either of these modes it locks out the other controllers. This is designed so if a service tech is working on the system, a user cannot turn ...