...vents, inspect heat exchanger. water sensor senses too cold or too hot water ROL - Roll out/Fusible Link sensor is 'Open Circuit' SNS - Temperature Sensor/Thermistor Failure Do not just, replace the ...
...soot that is coming out of the fireplace and covering the walls and ceiling. This has never been a problem in the past and I really need to know what could be causing this all of a sudden Hi, sounds ...
...coming out of the vent...what could cause this? Nests inside the heater, or build up of soot on the heat exchanger. You should always have your heater serviced each year at the onset of heater
...heating the pool water I have a MiniMax NT Series heater. The heated water coming into the pool is not much warmer then the pool water. It's hard to tell a difference. It takes about 3 hours to go up ...
Question about Raypak Pool & Spa
... clean out any dirt and debri from venting, inspect the underside of heat exchanger for build up or soot. ensure you have proper combustion/ventilation air openings if heater is in a shed. if heater ...
...there is still a problem of why that happened. First thing is to check the heat exchanger for soot build up or a blocked exhaust fan and check your gas pressure my guess is it is low. But do
Our hayward heater H250 model was installed last year.. this year it started up after the winter no problem. We put it on Standby mode while the poolliner was being replaced and not it will not come ...
282 questions posted
Usually answered in minutes!
774 Questions
131 Questions
104 Questions
113 Questions
87 Questions