5.5hp that only runs on choke, carb is clean, you have an air leak some where. try spraying carb cleaner around the carb, if it starts to choke out further then you found it. but it can still be the ...
#1 I don't know the proper adjustments for the carborator will not run at all unless the choke is partially closed - tried cleaning the carb. Now it won't run at all. Step one: spray some carb cleaner
Question about Yard Machines Heavy Machinery
CARB NOT GETTING FUEL.......STARTS WHEN PURGED...BUT DIES OUT !! WILL DIE-OUT AFTER GAS IS USEDUP STARTS WHEN PURGED. GAS ISN,T MAKING IT TOO SPARK PLUG Since I don't have info on your machine, I'll ...
lawnmower won't start The lawn mower wont start unless i put fuel directly into the carberator and only runs for a second or two I am not having any luck with crossing the number you passed. I really ...
I have a Briggs & Stratton 5HP Engine (Horizontal shaft) And it has the diaphragm carb on it. The last person to own it messed with the carb adjustments and it'll have trouble starting and idling ...
#1 I don't know the proper adjustments for the carborator will not run at all unless the choke is partially closed - tried cleaning the carb. Now it won't run at all. my 5HP troy bilt chipper sherdder
Question about Briggs & Stratton Heavy Machinery
...plugs. Also showing up in the oil causing to freeze up. Engine has only 547 hours. Sounds like your carb is flooding. Inside the carb, there is a simple valve that shuts off the fuel flow when the ...
Question about Heavy Machinery
...model 243-645B000 chipper. It had been stored for a number of years with gas. I took the tank and carb off and the stem was clogged up. it started up but I have to run it on choke to keep it
tecumseh carb leaking gas out of a hole on the side of carb BAD NEEDLE OR NEEDLE (GUMMED UP OR VARNISHED )SEAT OR COULD BE THE FLOAT. SHAKE THE FLOAT IN YOUR HAND YOU CAN FEEL AND HEAR GAS INSIDE IT =
...chipper wont start get spark need manual I am successful too at using the starting fluid in the carb or directly into the clinder. That is how I start my MTD 5.5hp chipper. My problem is I have
74 questions posted
Usually answered in minutes!
3 Questions
1 Questions
1 Questions
24 Questions