...pool heater. Recently the heater is making a rattling sound and the in and out hoses are bucking or pulsating. The water is still being heated but somehting does not sound right. low water flow is ...
pool heater model #H100IDP1 .It Wee have a Hayward pool heater model #H100IDP1 .it knocks or bangs after it has been on for a few minutes.is there a thermostat in the inlet header.if not what could it
pool heater 406A unitherm governor heater has a knocking sound make sure connected correctly not enough water passing through if you have a bypass close half way if no bypass check the maual bypass in
flashback on startup when the burner ignites, It ignites with a "boom" enough to knock the front panel off of the heater. clogged heat exchanger, clogged burner orifices, blocked venting, improper gas
...heater also knocks when starting My Alkalenity has been really low and tried all summer to raise with no success. I'm hoping it's not rusted out from the inside. The knocking sound almost seems like ...
...pool heater that had a jumper wire on it to start it up. i knocked off the wire and now i don't know where it was on the mil volt terminals. i put it where i thought it was but as soon as i touch the ...
...heater up unit is knocking pinging and shaking no leaking i shut it down what's going on The bypass assembly inside of the header has failed. It will need to be replaced. I would also replace the ...
...heater running this year > keeping the POOL at 93Fheater started knocking and banging, The pressure gauge jumps from 19 down to 16 with every knock.The heater continues to run but the pipes are ...
...knocking and banging continues on RECIRCULTE ( BY PASSING THE FILTER). Also water pressure going into the filter is the same coming out of the filter. which is the same water pressure when I by pass ...
459 questions posted
Usually answered in minutes!