Question about Ingersoll Rand Air Tools & Compressors
...stuck trigger condition. Remove the air strainer assembly (item # 10), followed by the spring (item # 8) then the throttle valve (item # 6) you will see the throttle valve stem (item # 9) spray some ...
...you have tried this but use a lubricant on the trigger if that doesnt work try unscrewing the case and inspecting the trigger inside for broken or stuck parts you mayneed to buy a new trigger ...
Question about Ingersoll Rand Air Tools & Compressors
...trigger YOU MIGHT HAVE A PROBLEM WITH THE THROTTLE VALVE SEAL ITEM #3 (O-RING) OR A STUCK THROTTLE VALVE PLUNGER ITEM# 5. TO ACCESS THESE PARTS YOU WILL NEED TO REMOVE THE INLET BUSHING ITEM# 6. ...
Question about Ingersoll Rand Air Tools & Compressors
ir2135ti runs when hooked up,in either direction sounds like the trigger is stuck internally
Question about Ingersoll Air Tools & Compressors
...trigger your pressure regulator pin is stuck-oil gun and attach hose repeate until pin frees or remove pin and clean with brake kleaN oil and replace That really could be one of two things. When you ...
Question about Ingersoll Air Tools & Compressors
...trigger not actuating the valve. Check up the handle for blockage in the exhaust (unlikely). Also check the parts of assembly 29 to make sure nothing is broken, if they are you could have the ...
STUCK TRIGGER USING IMPACT TAKING OFF TIRES TRIGGER STUCK IN ON POSITION BUT STOPPED WORKING, DISCONNECTED AIR, PULLED OUT TRIGGER WITH NEEDLE NOSE PLIERS. CONNECTED AIR AND GUN WORKED THEN STOPPED ...
8 questions posted
Usually answered in minutes!
69 Questions
79 Questions
34 Questions
24 Questions