from the claw, pull from the front of the carseat, re insert the straps into your selected slots, put the ends back into the claw, then pull on the strap by the metal lever to tighten the straps again
i cant put my carseat straps back on the carseat Why not? go to cosco.com and look up a manual or call the customer service number put the seatbelt straps in the rear connections
...seat belt and put the lap strap thru the back of the carseat and click in in on the oher side pull tight and carseat is secure. the shoulder strap part doesnt effect the safety of the car seat at ...
...put the straps through. Cannot get the straps to anchor down so they don't come out.. Thanks. Here's a manual: http://www.coscojuvenile.com/usa/eng/DJGFiles/ProductDocuments/43583614D.pdf Hope this ...
...put the strap through the back of the seat (you should have two ends) not the must go OVER the adjusts! now take the metal piece that adjust the length and pull it long enough for it to reach the two ...
...straps 1 inch from the seatbelt fastener. Some, but not all, manufacturers provide a metal locking bracket to be placed on the seat belt after the carseat is installed to prevent excessive slippage. ...
how do i put straps back into linen on carseat Hi Which model carseat do you have and which country are you in?
...straps i cant figure out how to get the saftey harness staps to go in right in the car seat i have im not sure if a peice is missing or if i am just doing it wrong. ON THE BACK OF YOUR CARSEAT ARE 2 ...
put saftey 1st straps back on after wash Hi Due to the safety implications of a carseat harness being incorrectly fitted they should never be removed. To replace them the carseat would need to come in
...straps through the holes in the footmuff and press the back of the footmuff into the curve of the carseat. Replace the harness pads. You're ready to go! When you use the carseat, simply put baby ...
57 questions posted
Usually answered in minutes!
202 Questions
23 Questions
19 Questions
17 Questions
15 Questions