Mantis Little Wonder Tiller/Cultivator #7262h "point manual" Questions

...H35-4556N Ser. 2071B need to find free download on repair manual so I can see how to replace the points to get the tiller firing. http://manuals.mtdproducts.com/mtd/Public.do?BrandCode=10001Free ...

Need to know how to change the points I have a 1979 6HP troybuilt tiller. I lost the owners manual and I need to know how to change the points. Thanks for your help. The engine type is key here. For ...

i need manuel and parts i have a 6 three point hitch long mfg tillew moldle # 1542 seriel # 1151 where can i find repair manual and parts looking for a"Long" brand garden tiller model # 1542 for parts

...manual which CLEARLY states to rotate the Mantis forward on a level surface until it rests on its gas tank then fill the crankcase. I wish they would have put one of those triangle boxes with an ...

...it will have to be cleaned. They will do this when they set for a while. Not sure if that will have points and condenser or not but if it does and will not fire they will have to be cleaned or ...

...point where it was hitting the plug. Check your manual for the correct plug type. They my have put the wrong on in and if you just keep putting in the same plug... Call troy-bilt they are pretty good ...

...point to where it will stall after a couple seconds. spray some wd40 aorunfd the ouside body of the carb and tank were the carb attaches if applicable and restart if it runs a little longer you will ...

...manual for the tiller. One last point, the tiller must be in neutral when engaging the pto clutch. From your note, it sounded like you were engaging the clutch with the forward/reverse lever in the ...

...point condenser spark plug rebuilt carburator and My troy buit tiller Model HH60 105113h won<t start no spark Hi and welcome to FixYa, I am Kelly The HH60 is the engine model number and 105113H is ...

point tiller? I went thru some really deeeep mud(clay type. I heard something bang. The pto turns but not the blades. I was told it might be the shear bolt. Now I would like to find it to see if it is