...build pressure Compressor stopped building pressure, it is an oil based unit. i replaced the piston assy, now it builds pressure to 25 psi, unit keeps running but will not build past 25psi, cannot ...
Question about Campbell Hausfeld Air Tools & Compressors
...build up air pressure when i turn it on motor runs but it will not build up air pressure are you building any pressure or none at all. If your building some pressure start looking for leaks check the ...
Question about Makita Air Tools & Compressors
...build pressure to 100psi of rated 140psi Chances are that the pressure switch, were you turn the compressor on and off, is bad. When they go out, they no longer build pressure to the regulated level ...
Question about Campbell Hausfeld Air Tools & Compressors
...build pressure, there seems to be pressure building in the tank but the Pressure gauge does not move. I removed the pressure line going to the tank, it gets hot and there seems to be good pressure ...
Question about Hitachi Air Tools & Compressors
...build up pressure. it aint the pressure gauge, dummy. its is a problem with some kind of valve that is supposed to kick on- or off when the pressure gets low enough. problem is which valve and how to ...
Question about Campbell Hausfeld Air Tools & Compressors
I have a Craftsman 5.5hp compressor, wouldn't shut off building pressure. I replaced pressure switch with new one from sears parts dept. Still have same problem. Can this be adjusted down to shu ...
Question about Campbell Hausfeld Air Tools & Compressors
...build pressure I've got a campbell hausfeld 60 gal. upright with a 6 hp. motor. When I turn it on, it slowly builds pressure and the copper pipe coming out of the compressor to the tank gets hot and ...
air compressor will not shut off Can you tell if the pressure is building up? Does it have a pressure gauge? If it appears the pressure is building up it is probably the pressure switch. This will be ...
Question about Campbell Hausfeld Air Tools & Compressors
...hausfeld 20 gal compressor builds pressure but once pressure drops motor does not kick on to build pressure up again. turn off wait then on will do same thing Needs pressure switch adjusted or ...
Question about Stanley Air Tools & Compressors
...build pressure to about 40 pounds (tank pressure), and then keep running but not build more pressure or build it very slowly. No leaks. sudden loss of capacity like that usually indicates broken or ...
81 questions posted
Usually answered in minutes!
35 Questions
30 Questions
27 Questions