...chuck to remove the chisel. Sometimes it just needs some lubrication inside where the ball holds onto the bit. If that doesn't work, you need to replace the chuck pieces. Often times they come in ...
roto hammer works but leaks oil out the chuck If you are getting leakage out the chuck end, the shaft seal needs replaced. You can get it done at a Bosch service center or get the seal and replace it ...
Bit will not lock into chuck. Ball inside chuck is stuck in "in" position, Bit slides all the way in and out w/o engaging the ball. Open locking sleeve, clean the inside with a good "rust type cleaner
I have a bosch 11240 and the tool holder will not hold the tool, is there an easy fix "CHUCK" is full of dust, clean with a good cleaner lubricant, white grease before using again
36 questions posted
Usually answered in minutes!
29 Questions
20 Questions
12 Questions